Jump to content

Grandview Burial Notice

In order to maintain good relations with Grandview Cemetery directly to the west of the flying field, there is to be no model flying at the CCRCC model air park during funerals that are taking place with the exception of SMALL, LOW SPEED electric powered aircraft. These small aircraft must remain within the bounds of the field.  I will do my best to keep this page up to date with notices I receive, but the list posted at the clubhouse should be checked before flying for more current updates.

Friday 1/18/19 - 11 AM

Saturday 1/19/19 - 1 PM

Saturday 1/19/19 - 2 PM

Stop flying 15 minutes before the burial time. If possible, visually check 45 minutes after burial starts to insure it is actually over.

Sign in to follow this  
  • entries
  • comment
  • views

ICARE-ICARUS L23 Super Blanik (3.0m)

Sign in to follow this  


ICARE is pleased to introduce this nice scale glider for the discerning modeller.

We are pleased to offer a scale model of this popular sailplane. With a span of 3.0 meters, it is large enough to aerotow, while remaining agile enough for use on the slope or winch.

Currently one of the nicest after war vintage glider that we carry, this model is a very accurate reproduction at 1:6 scale and comes in the white classic paint scheme.

It comes ready for radio gear installation. Ailerons, rudder, elevator and airbrake will control the plane. Fixed wheel is to be installed and help landing. Canopy tray comes to outfit canopy area to match full size interior and canopy with frame.

The flying behaviour is tender and very smooth, easy to thermal, and responsive for slope flying as well.

The kit is almost completely finished. The wings are sheeted foam wing covered with Oracover of the best quality and the ailerons are hinged and airbrakes installed.

Rudder and elevator are fiberglass/epoxy hollow moulded.

The clear plastic canopy and moulded frame will allow scale outfit, wing joiner system is installed in the fuselage and a steel rod is supplied as a wing joiner.

All what’s required is your radio gear. You will need 6 micro servos and a standard 6 channel receiver.

An extensive set of Vinyl decals and hardware package is completing the kit.

Super Blanik L 23, also available with FES installed (electric motor in the nose)


Scale: 1:6
Wing Span: 3.0 m (1189″)
Length: 1.44 m (57″)
Wing Area: 65 dm2 (1007 sq. in.)
Wing Airfoil: HQ 3/15
Wing Loading: 46 g/dm2 (15 oz/sq. ft.)
Flying Weight: 3.0 kg (105 oz)
Radio: Standard radio.
Sub-micro servos for the wings.


See more posts about ICARE-ICARUS

ICARE-ICARUS L23 Super Blanik (3.0m) ICARE-ICARUS L23 Super Blanik (3.0m) ICARE-ICARUS L23 Super Blanik (3.0m)

The post ICARE-ICARUS L23 Super Blanik (3.0m) appeared first on Model Airplane News.

View the full article

Sign in to follow this  


Recommended Comments

There are no comments to display.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now